Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 9. Check the wiring harness between trunk lid actuator opener assembly connector F-04 (terminal 1) and ETACS-ECU connector C-317
(terminal 32).
NOTE: Also check intermediate connector C-210 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-210 is damaged, repair or replace the damaged components) as described in Harness Connector Inspection.
Q: Is the wiring harness between trunk lid actuator opener assembly connector F-04 (terminal 1) and ETACS-ECU connector C-317 (terminal 32) in
good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the trunk lid opener works normally.
Inspection Procedure E-4
INSPECTION PROCEDURE E-4: Keyless Entry System: Encrypted code cannot be registered.
TECHNICAL DESCRIPTION (COMMENT)