Sebring LX Coupe V6-3.0L VIN H (2002)
1. Measure the resistance available at the harness side of sunroof motor assembly connector D-08 without disconnecting sunroof motor assembly.
2. Measure the resistance between terminal 5, 9 and ground by backprobing.
-
The resistance should be 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES : Go to Step 13.
NO: Go to Step 11.
STEP 11. Check sunroof motor assembly connector D-08 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is the sunroof motor assembly connector D-08 in good condition?
YES : Go to Step 12.
NO : Repair or replace the damaged components). Refer to Harness Connector Inspection. The sunroof function should work now normally.