Sebring LX Coupe V6-3.0L VIN H (2002)
1. Disconnect the sunroof switch connector D-07 and measure at the harness side.
2. Measure the resistance between terminal 2 and ground.
-
The resistance should be 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES: Go to Step 17.
NO: Go to Step 15.
STEP 15. Check sunroof switch connector D-07 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is the sunroof switch connector D-07 in good condition?
YES: Go to Step 16.
NO : Repair or replace the damaged components). Refer to Harness Connector Inspection. The sunroof function should work now normally.
