chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1791 > < Component Tests and General Diagnostics|Page 1789
Page 126
background image

1. Disconnect the windshield wiper motor connector A-03.
2. Connect a battery to the windshield wiper motor as shown. Then check the windshield wiper motor operates normally at high and low speeds.

Q:  Is the wiper motor in good condition?

YES :  Go to Step 5.

NO :  Replace the windshield wiper motor. Verify that the windshield wiper works normally.

STEP 5. Check the ground circuit to the windshield wiper motor. Test at the windshield wiper motor connector A-03.

1. Disconnect windshield wiper motor connector A-03 and measure the resistance available at the wiring harness side of the connector.

Component Tests and General Diagnostics|Page 1791 > < Component Tests and General Diagnostics|Page 1789