Sebring LX Coupe V6-3.0L VIN H (2002)
2. Measure the resistance value between terminal 2 and ground.
-
The resistance should be 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES : Go to Step 8.
NO : Go to Step 6.
STEP 6. Check windshield washer motor connector A-33 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is windshield washer motor connector A-33 in good condition?
YES : Go to Step 7.
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the windshield washer works normally.
