chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1819 > < Component Tests and General Diagnostics|Page 1817
Page 154
background image

STEP10. Check the combination meter connector C-102 and ETACS-ECU connector C-318 for loose, corroded or damaged terminals, or terminals 
pushed back in the connector.

Q:  Are combination meter connector C-102 and ETACS-ECU connector C-318 in good condition?

YES :  Go to Step 11.

NO :  Repair or replace the damaged components). Refer to Harness Connector Inspection. Verify that the low washer fluid level warning light works
normally.

Component Tests and General Diagnostics|Page 1819 > < Component Tests and General Diagnostics|Page 1817