chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1827 > < Component Tests and General Diagnostics|Page 1825
Page 162
background image

STEP 11. Check the wiring harness between combination meter connector C-101 and ETACS-ECU connector C-318. 

Q:  Is the wiring harness between combination meter connector C-102 and ETACS-ECU connector C-318 in good condition?

YES :  No action is necessary and testing is complete. 

NO :  The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The seat belt warning light should work normally.

Inspection Procedure I-1

INSPECTION PROCEDURE I-1: Door ajar warning light: door ajar warning light does network normally.

CIRCUIT OPERATION  
If any of the doors or the trunk lid are open, ETACS-ECU illuminates door ajar warning light.

Component Tests and General Diagnostics|Page 1827 > < Component Tests and General Diagnostics|Page 1825