Sebring LX Coupe V6-3.0L VIN H (2002)
pushed back in the connector.
Q: Is combination meter connector C-103 and ETACS-ECU connector C-318 in good condition?
Check the combination meter connector C-103 and ETACS*ECU connector C-318 for loose, corroded or damaged terminals, or terminals pushed
back in the connector.
YES : Go to Step 9.
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The door ajar warning light should work normally.
STEP 9. Check the wiring harness between combination meter connector C-103 and ETACS-ECU connector C-318.
Q: Are the wiring harness between combination meter connector C-103 and ETACS-ECU connector C-318 in good condition?
YES : No action is necessary and testing is complete.
NO : Repair or replace them. The door ajar warning light should work normally.
Inspection Procedure J-1
