Sebring LX Coupe V6-3.0L VIN H (2002)
INSPECTION PROCEDURE J-1: Headlight, Taillight: Taillights do not illuminate.
CIRCUIT OPERATION
The front-ECU illuminates the taillights if the column switch sends the taillight ON signal to the front-ECU.
TECHNICAL DESCRIPTION (COMMENT)
The column switch or the front-ECU may be defective.
NOTE: If only one light does not illuminate, the wiring harness between the light and the front-ECU may be defective or the light bulb
may be burned out. In this case, check the circuit by referring to Taillight, Position Light and License Plate Light. See: Lighting and Horns
TROUBLESHOOTING HINTS
-
The column switch (turn-signal light and lighting switch) may be defective
-
The front-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the DTC.
