Sebring LX Coupe V6-3.0L VIN H (2002)
Ignition Coil: Testing and Inspection
IGNITION COIL AND IGNITION POWER TRANSISTOR
Required Special Tool:
-
MB991348: Test Harness Set
Measurement Method
1. Disconnect the connector, and connect test harness special tool, (MB991348), in between. (All terminals should be connected.)
2. Connect the oscilloscope probe to ignition coil connector terminal 3.
Alternate method (Test harness not available)
1. Connect the oscilloscope probe to ECM <M/T> or PCM <A/T>terminal 11.
