Sebring LX Coupe V6-3.0L VIN H (2002)
4.
Install the spring insulators p/n MR151208 as shown (Fig. 1). Push each insulator onto the spring until the outer end of the insulator is flush with
the spring edge.
5.
Assemble each strut and reinstall them on the vehicle.
6.
Align the vehicle using the specification found on page 2A-6 of the service manual.
7.
Verify the repair.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
FAILURE CODE
