Sebring LX Coupe V6-3.0L VIN H (2002)
MB991239 to slip. This is dangerous.
2. While holding the piston rod, remove the jam nut.
ASSEMBLY SERVICE POINTS
>>A<< COIL SPRING INSTALLATION
CAUTION: Do not use an impact wrench to tighten the bolt of special tool MB991237. It will break the special tool.
1. Install special tools MB991237 and MB991239 in the same manner as for removal, and compress the coil spring to install it to the shock
absorber.
2. Align the edge of the coil spring to the stepped part of the shock absorber spring seat.
>>B<< UPPER BRACKET ASSEMBLY INSTALLATION
Install the upper bracket assembly so that the lower bushing inner pipe of the shock absorber is at the position shown.
>>C<< JAM NUT INSTALLATION
1. Temporarily tighten the jam nut.
CAUTION: Do not use an impact wrench to tighten the jam nut, otherwise the jam nut will be damaged.
