Sebring LX Coupe V6-3.0L VIN H (2002)
9. Start the engine and run it at idle for one to two minutes.
10. Move the selector lever through all positions, and then move it to the "N" position.
11. Check that the A/T fluid level is at the "COLD" mark on the dipstick. If the level is lower than this, pour in more A/T fluid.
12. Drive the vehicle until the A/T fluid temperature rises to the normal temperature ( 70 - 80 ° C ( 158 - 176 ° F )), and then check the A/T fluid level
again. The A/T fluid level must be at the "HOT" mark.
Note: The A/T fluid temperature is measured with scan tool ( MUT II ).
Note: The "COLD" level is for reference only, the "HOT" level should be regarded as the standard level.
Note: If it takes some amount of time until the A/T fluid reaches its normal operating temperature ( 70 - 80 ° C ( 158 - 176 ° F )), check the A/T fluid
level by refering to the diagram.
13. Firmly insert the dipstick into the oil filler tube.
