Sebring LX Coupe V6-3.0L VIN H (2002)
Shift Solenoid Relay: Testing and Inspection
A/T CONTROL RELAY CHECK
1. Remove the A/T control relay.
2. Use jumper wires to connect the A/T control relay terminal 2 to the positive battery terminal and terminal 3 to the negative battery terminal.
3. Check the continuity between terminal 1 and terminal 4 of the A/T control relay when the jumper wires are connected to and disconnected from
the battery.
4. If there is any problem with the N7 control relay, replace it.