Sebring LX Coupe V6-3.0L VIN H (2002)
Clutch Pedal Assembly: Testing and Inspection
CLUTCH PEDAL CHECK AND ADJUSTMENT
1. Turn back the carpet etc. under the clutch pedal.
2. Measure the clutch pedal height and the clutch pedal clevis pin play.
Standard value (A): 174.7 - 177.7 mm (6.88 - 7.00 inch)
[From the surface of melting sheet (Floor board shield) to the face of pedal pad]
Standard value (B): 1 - 3 mm (0.04 - 0.12 inch)
3. If the height of the clutch pedal is not within the standard value, loosen the jam nut and adjust the pedal height to the standard value pushing the
clutch pedal position switch.
CAUTION: Do not push in the master cylinder pushrod at this time.
4. If the clutch pedal play is not within the standard value, loosen the jam nut and move the pushrod to adjust.
5. After the adjustments, confirm that the clutch pedal free play (measured at the face of the pedal pad) and the distance between the clutch pedal (the
