chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Wheel Bearing > < Constant Velocity Joint Boot|Service and Repair|Page 2617
Page 4
background image

Example: If E = 2.3 mm (0.1. inch) then W = 3.5 mm (0.15 inch).

14. Check that the BJ boot band is not sticking out past the place where it has been installed. If the BJ boot band is sticking out, remove it and then

repeat the operations in steps 11 to 13 using a new BJ boot band.

Wheel Bearing > < Constant Velocity Joint Boot|Service and Repair|Page 2617