Sebring LX Coupe V6-3.0L VIN H (2002)
in position.
3. Insert the pinion shaft.
4. Measure the backlash between the side gear and onion.
Standard value:..............0.025 - 0.150 mm (0.00 - 0.0059 inch)
5. If the backlash is out of specification, select a spacer and remeasure the backlash.
NOTE: Adjust until the backlashes on both sides are equal.
>> B <<
LOCK PIN INSTALLATION
Install the lock pin so that it will be oriented in the direction shown.
>> C <<
TAPER ROLLER BEARING INSTALLATION
Using special tools MD998812 and MD998819, press install the taper roller bearing.
