Sebring LX Coupe V6-3.0L VIN H (2002)
13. Tighten the two upper bolts at the delta sash assembly.
CAUTION: Ensure that the weatherstrip is not wrinkled or out of position.
14. Install the drip line weatherstrip to the weatherstrip holder.
15. Install the door trim and the waterproof film
16. Check the door window glass alignment according to following procedure.
1. Close the door window glass fully, and close the door until the clearance between the door window glass rear end and the weatherstrip reaches
100 mm (3.9 inches). At this time, the distance between the rear end of the belt line molding outer and the quarter panel should be 113.5 -
118.5 mm (4.46 - 4.67 inches).
2. The clearance between the glass and the glass catch should be within the range of standard values (a, c, e, g) when the window is fully closed
and the door is closed gently.
