Sebring LXI Convertible V6-2.7L VIN R (2002)
5. Remove the banjo bolt connecting the brake hose to the brake caliper. There are two washers (one on each side of the brake hose fitting) that will
come off with the banjo bolt. Discard these washers.
6. Remove the two caps in place over the caliper guide pin bolts.
7. Remove the two caliper guide pin bolts.
8. Remove caliper from caliper adapter and brake rotor. The outboard shoe will probably stay with the caliper adapter while the inboard shoe will
come off with the caliper as the caliper is removed.
