Sebring LXI Convertible V6-2.7L VIN R (2002)
Crankshaft: Description and Operation
CRANKSHAFT
DESCRIPTION
The crankshaft is constructed of a forged micro alloy steel. The six throw, nine counterweight crankshaft is supported by four select fit main bearings
with the number three serving as the thrust washer location (Fig. 47). The select fit identification markings will be on the rear side of the number nine
(rearmost) counterweight. The six separate connecting rod throws are an even-firing design which reduces torque fluctuations while a vibration
damper is used to control torsional vibration. The crankshaft oil seals are a one piece design. The front seal is retained by the timing chain cover, and
the rear seal in a housing that attaches to the cylinder block.
OPERATION
The crankshaft transfers force generated by combustion within the cylinder to the flywheel or flexplate.
