Sebring LXI Convertible V6-2.7L VIN R (2002)
5. Check the valve spring installed height after refacing the valve and seat (Fig. 34).
VALVE AND SPRING INSTALLED HEIGHT
1. Coat valve stems with clean engine oil and insert them in cylinder head.
2. If valves or seats have been refaced, check valve tip height (a) (Fig. 34). If valve tip height for intake valve is greater than 47.59 (1.8737 inch) or
49.14 (1.9347 inch) for exhaust valve, grind valve tip until within specifications. Make sure measurement is taken from cylinder head surface to
the top of valve stem.
