Sebring LXI Convertible V6-2.7L VIN R (2002)
13. Remove the primary timing chain.
14. For removal of crankshaft sprocket, Refer to CRANKSHAFT - REMOVAL.
Crankshaft Sprocket
1. Remove primary timing chain.
CAUTION: Use care not to turn crankshaft while removing crankshaft sprocket, as damage to valves and or pistons could occur.
2. Remove crankshaft sprocket by first installing the crankshaft damper bolt. Apply grease or equivalent to damper bolt head and position Special
Tools 5048-1, 5048-6, and 8539 on sprocket and crankshaft nose (Fig. 115). Remove sprocket using care not to rotate the crankshaft.
INSTALLATION
Timing Chain
1. Inspect all sprockets and chain guides. Replace if worn.
2. For crankshaft sprocket installation procedures, Refer to CRANKSHAFT - INSTALLATION.
3. If removed, install right and left side short chain guides (Fig. 114). Tighten attaching bolts to 28 Nm (250 in. lbs.).
