Sebring LXI Convertible V6-2.7L VIN R (2002)
Catalytic Converter: Service and Repair
Catalytic Converter - Rear
CATALYTIC CONVERTER REAR - 2.7L
REMOVAL
1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Remove exhaust cross-under pipe.
4. Disconnect upstream oxygen sensor.
5. Remove nuts attaching converter to exhaust manifold (CATALYTIC CONVERTER - REAR 2.7L).
6. Remove exhaust manifold heat shield.
7. Remove catalytic converter.
8. Remove and discard gasket.
INSTALLATION
1. Clean manifold to converter sealing surfaces.
2. Position new gasket on converter inlet flange (CATALYTIC CONVERTER - REAR 2.7L).
