chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Information Bus > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 2611

Sebring LXI Convertible V6-2.7L VIN R (2002)

Page 1
background image

Idle Air Control (IAC) Motor: Service and Repair

REMOVAL

1. Disconnect the negative battery cable.

Fig.18 Idle Air Control Motor

2. Disconnect the IAC electrical connector.
3. Remove the IAC mounting screws.
4. Remove the IAC.

INSTALLATION

1. Install the IAC to the throttle body.
2. Tighten mounting screws to 5.1 N.m (45 in. lbs) torque
3. Attach electrical connector to the IAC
4. Connect the negative battery cable

Information Bus > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 2611