Sebring LXI Convertible V6-2.7L VIN R (2002)
Alternator: Service and Repair
REMOVAL
1. Open Hood.
2. Disconnect the negative battery cable.
3. Raise vehicle and support.
4. Remove the accessory drive belt splash shield.
5. Loosen the accessory drive belt refer to the cooling section.
6. Remove the lower mounting bolt.
7. Lower the vehicle.
Fig.5 Generator Battery Cable
8. Remove the B+ terminal and field connection (Fig. 5).
9. Disconnect the electrical connector to the A/C pressure switch and A/C clutch.
10. Remove the engine oil dip stick.
11. Remove the 2 upper mounting bolts.
Fig.6 Generator
