Sebring LXI Convertible V6-2.7L VIN R (2002)
24. Remove intermediate shaft roller bearing snap ring (Fig. 151).
25. Press intermediate shaft out of roller bearing supported by bearing splitter P-334 (Fig. 152). Roller bearing is not re-usable once removed. It is
necessary to install a new roller bearing upon re-assembly.
ASSEMBLY
NOTE: Do not re-use snap rings when servicing the intermediate shaft assembly. Discard snap rings and install new ones provided with available
snap ring service kit.
NOTE: When installing 1/2 & 5/R synchronizers, make sure to align oil slots on synchronizer hub face with oil hold in the shaft splined hub journal.