Sebring LXI Sedan V6-2.7L VIN R (2002)
4. Mount the caliper in a vise equipped with protective jaws.
Fig. 10 Dust Boot Removal
5. Remove the piston dust boot from the caliper and discard.
NOTE: Do not use a screw driver or other metal tool for seal removal. Using such tools can scratch the bore or leave burrs on the seal groove
edges.
6. Using a soft tool such as a plastic trim stick, work the piston seal out of its groove in caliper piston bore. Discard the old seal.
7. Clean the piston bore and drilled passage ways using alcohol or a suitable solvent. Wipe it dry using only a lint-free cloth.
