Sebring LXI Sedan V6-2.7L VIN R (2002)
The hydraulic diagram shows the vehicle in the ABS braking mode. The diagram shows one wheel is slipping because the driver is attempting to stop
the vehicle at a faster rate than is allowed by the surface on which the tires are riding.
^
The normally open and normally closed valves modulate (build/decay) the brake hydraulic pressure as required.
^
The pump/motor is switched on so that the brake fluid from the low pressure accumulators is returned to the master cylinder circuits.
^
The brake fluid is routed to either the master cylinder or the wheel brake depending on the position of the normally open valve.
