Sebring LXI Sedan V6-2.7L VIN R (2002)
10. Install park brake cable into console bracket. Be sure tabs on park brake cable retainer, have expanded out to hold park brake cable in console
bracket.
CAUTION: Discard output cable retaining clip and tension equalizer after removing it from the park brake output cable. A new tension equalizer
and retaining clip is to be used when installing a new rear park brake cable.
11. Using a screwdriver, unlatch the park brake output cable retainer. Then remove cable retainer and park brake cable tension equalizer from park
brake lever output cable and discard components.
CAUTION: A new cable tension equalizer must be installed when replacing a rear park brake cable. The new cable tension equalizer is required
to correctly adjust park brake cable tension after installing a new rear park brake cable.
