Sebring LXI Sedan V6-2.7L VIN R (2002)
4. Install manifold attaching bolts and tighten in sequence shown in (Fig. 107) to 12 Nm (105 in. lbs.). Remove bolt used for aligning manifold.
5. Connect the fuel injector electrical connectors.
NOTE: Make sure fuel injectors are located in the correct location and position, as upper intake manifold interference could occur.
6. Install screw attaching fuel rail support bracket to the throttle body support bracket.
7. Connect fuel supply hose to fuel rail.
8. Install upper intake manifold.
