Sebring LXI Sedan V6-2.7L VIN R (2002)
1. Install new gasket to lower part of rear catalytic converter. If installing new cross-under pipe, transfer oxygen sensors to new pipe.
2. Loosely install cross-under pipe to catalytic converters. Snug nuts up equally using hand pressure.
3. Tighten 2 nuts for cross-under pipe to rear catalytic converter to 28 Nm (250 inch lbs.).
4. Tighten 2 nuts for cross-under pipe to front catalytic converter to 28 Nm (250 inch lbs.).
5. Connect exhaust system pipe to cross-under pipe. Tighten attaching fasteners to 28 Nm (250 inch lbs.)
6. Install oil pan to transmission structural collar.
7. Reconnect downstream oxygen sensor connectors.
8. Lower vehicle.
