chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Door Switch > < Daytime Running Lamp Control Unit|Diagrams|Page 6866
Page 1
background image

Dome Lamp Bulb: Service and Repair

REMOVAL 

1. Disconnect and isolate battery negative cable.
2. From the left side of the vehicle, insert a flat bladed pry tool under the lens.
3. Remove bulb.

INSTALLATION 

1. Insert bulb into lamp
2. Push lens into place
3. Connect battery negative cable.

Door Switch > < Daytime Running Lamp Control Unit|Diagrams|Page 6866