chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Headlamp Bulb Replacement|Page 6901 > < Hazard Warning Switch|Locations|Page 6895
Page 1
background image

Headlamp Bulb: Service and Repair
Headlamp Bulb Replacement

REMOVAL 

CAUTION:  Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. Disconnect and isolate battery negative cable.
2. Remove headlamp unit retaining screws.
3. Remove headlamp unit to expose back of unit.
4. Disconnect wire connector from back of headlamp bulb.
5. Rotate retaining ring counterclockwise.
6. Remove retaining ring.
7. Pull headlamp bulb and remove from headlamp unit.

INSTALLATION 

1. Install headlamp bulb to the headlamp unit.
2. Install headlamp bulb retaining ring.
3. Rotate retaining ring clockwise.
4. Connect wire connector to bulb.
5. Install the headlamp unit
6. Install headlamp unit retaining screws.
7. Connect the battery negative cable.

Headlamp Bulb Replacement|Page 6901 > < Hazard Warning Switch|Locations|Page 6895