Sebring LXI Sedan V6-2.7L VIN R (2002)
Headlamp Alignment Switch: Service and Repair
HEADLAMP LEVELING SWITCH
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.23 Headlamp Leveling Switch
2. Using a trim stick, pry the trim bezel from the instrument panel.
3. Disconnect wire harness connector from switch.
4. Remove switch from bezel.
INSTALLATION
1. Install switch to trim bezel.
2. Connect wire harness connector to switch.
3. Install trim bezel to instrument panel.
4. Connect battery negative cable.
