Sebring LXI Sedan V6-2.7L VIN R (2002)
Shift Solenoid: Service and Repair
SOLENOID/PRESSURE SWITCH ASSY
REMOVAL
NOTE: If solenoid/pressure switch assembly is being replaced, it is necessary to perform the TCM Quick Learn Procedure.
1. Disconnect battery negative cable.
2. Remove air cleaner assembly.
3. Disconnect solenoid/pressure switch assembly connector.
4. Disconnect input speed sensor connector.
5. Remove input speed sensor (Fig. 294).
6. Remove three (3) solenoid/pressure switch assembly-to-transaxle case bolts (Fig. 295).
