Sebring LXI Sedan V6-2.7L VIN R (2002)
8. Remove Junction Block/BCM by pulling straight down from the mounting bayonet.
9. Disconnect BCM wire connectors and remove the assembly.
10. Remove Junction Block/BCM from vehicle.
11. With the Junction Block/BCM removed from the vehicle, separate the BCM from the Junction Block.
12. Remove the two BCM attaching screws and release the two BCM locking latches from the Junction Block.
13. Disconnect BCM from the Junction Block.
INSTALLATION
1. Connect BCM to the Junction Block.
2. Install the BCM to the Junction Block and install the attaching screws.
3. Install Junction Block/BCM to vehicle.
4. Connect BCM wire connectors.
5. Install Junction Block mounting screws.
6. Connect wire harness connectors to Junction Block.
7. Install silencer.
8. Install instrument cluster hood.
9. Install center bezel.
10. Install end cap.
11. Connect battery negative cable.
