Sebring LXI Sedan V6-2.7L VIN R (2002)
3. Install knuckle end of trailing link in rear knuckle.
CAUTION: It is important that the following procedure be done when installing the trailing arm hanger bracket to the body of the vehicle. This
procedure will ensure that the hanger bracket is installed in the correct position on the vehicle.
4. Install trailing link hanger bracket on vehicle and loosely install the 4 attaching bolts. Then install 2 drift pins of appropriate size in positioning
holes on hanger bracket and into locating holes in body. With hanger bracket correctly positioned on vehicle tighten the 4 hanger bracket mounting
bolts to a torque of 34 Nm (25 ft. lbs.).
CAUTION: When installing trailing link bushing retainers, the retainers must be installed with cupped side of retainer facing away from bushing and
knuckle.
5. At the knuckle, install the outer trailing link bushing, (gold) outer bushing retainer and retaining nut on trailing link. Using a large adjustable
wrench on flat of trailing link to keep it from rotating tighten the trailing link retaining nut to a torque of 99 Nm (73 ft. lbs.).
