Sebring Sedan L4-2.4L (2007)
Installation - JS-41
INSTALLATION - JS-41
1. Place fascia on fender push pins and slide rearward.
2. Install fasteners (4) attaching fascia to front fenders (7).
3. Install fasteners (1) attaching top of fascia to radiator support crossmember.
4. Install front wheelhouse splash shields.
5. If equipped, install fog lamp wire connector and side marker connector from body harness, if equipped.
6. Install lower fascia closure panel.
7. Install grille.
8. Install air inlet duct.
