Sebring Sedan L4-2.4L (2007)
Front Door Latch: Service and Repair
Power Carrier Plate
Removal
REMOVAL
1. Remove mirror flag bezel.
2. Remove trim panel. Refer to Trim Panel.
3. Remove glass.
4. Disconnect wire harness from A-pillar.
5. Disconnect power mirror connector.
6. Accessing through latch plug (2), disconnect latch and handle links.
7. Remove door latch fasteners from door shut face.
8. Remove ten carrier plate fasteners (1).
9. Remove carrier plate from door.
Installation
INSTALLATION