chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Keyless Entry Transmitter|Specifications|Page 11623 > < Remote Start System - Antenna Diagnostic Chart|Page 11619
Page 1
background image

Keyless Entry Transmitter: Specifications

TRANSMITTER

BATTERY

The transmitter has two 3 volt batteries, which can be removed and replaced without special tools. Insert a dime in the side slot of the transmitter and
twist. the halves should separate and the batteries are stacked on top of each other. The batteries are available at local retail stores. Recommended
batteries are Panasonic CR 2016 or equivalent. Battery life is about two years.

RANGE

Operation range is within 12 meters (40 ft.) of the module/receiver.

Keyless Entry Transmitter|Specifications|Page 11623 > < Remote Start System - Antenna Diagnostic Chart|Page 11619