Sebring Sedan L4-2.4L (2007)
Seat Cushion: Service and Repair
Front Seat Cushion Side Shields
Removal
REMOVAL
1. Remove seat from vehicle.
2. If equipped, remove recliner handle.
3. Remove side shield side cover (4), seatbelt anchor bolt (3), and seat belt (2), from side cover (1).
4. Remove screw (1) attaching seat cushion side shield to the bottom and side of seat cushion.
5. Remove shield from seat
6. Disconnect switch wire connectors, if equipped.
7. Remove seat switches, if equipped.
Installation
INSTALLATION
1. Transfer seat switches, if equipped.
2. Connect switch wire connectors to cushion side shield, if equipped.
3. Place shield in position on seat cushion.