Sebring Sedan L4-2.4L (2007)
Brake Pad: Removal and Replacement
Removal
REMOVAL
Refer to Warnings and Cautions
1. Raise and support the vehicle.
NOTE: Perform STEP 2 through STEP 5 on each side of the vehicle to complete pad set removal.
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: When removing the caliper guide pin bolts (2, 3) note that one (upper) has a special sleeve on the end. It is important that this bolt
be installed in the upper mounting hole when the caliper is installed.
