Sebring Sedan L4-2.4L (2007)
11. Place the shoe assembly outboard-side-up on a flat surface.
12. Remove the adjuster spring (2) from the leading shoe (3) and the lever pawl (1).
13. Remove the lever pawl (1) from the pivot on the rear shoe (5).
14. Flip the shoe assembly over to show the inboard side.
15. Remove the upper shoe return spring (1).
16. Remove the adjuster (5) from the shoes and parking brake lever (2).
Installation
INSTALLATION
NOTE: Perform STEP 1 through STEP 21 on each side of vehicle to complete shoe set installation, then proceed to STEP 22.
