Sebring Sedan L4-2.4L (2007)
4. Insert the parking brake cable through the hole in the trailing link and the support plate (3).
5. Install the hair pin (1) securing the parking brake cable (2) to the brake support plate (3).
6. Install the parking brake shoes (and check adjustment) and components removed to access them.
7. Install tire and wheel assembly (1). Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
8. Lower the vehicle.
9. Block the tire and wheel assemblies so the vehicle does not move with the vehicle parking brake lever released.
