Sebring Sedan L4-2.4L (2007)
10. Ensure that the seal grommet on the cable installed from underneath is fully seated into the floor pan.
11. Route the parking brake cable under the carpeting, up to the parking brake cable retaining bracket (2) on the floor pan. Insert the parking brake
cable (3) through the mounting hole in the retaining bracket. Push the cable in until the locking fingers on the cable retainer (1) lock the cable into
place.
CAUTION: A NEW parking brake cable equalizer (2) must be installed when servicing the parking brake cables or lever. The equalizer
has an integrated bent nail tensioner that needs to be stretched upon installation placing the correct tension on the cables.
12. Remove and install a NEW parking brake cable equalizer (2) on the parking brake lever (3) output cable.
13. Install the rear parking brake cables (1) into the equalizer (2) on the parking brake lever output cable.
14. Ensure that the parking brake cables are correctly installed on the equalizer and aligned with the cable track on the parking brake lever.
