Sebring Sedan L4-2.4L (2007)
Parking Brake Shoe: Service and Repair
Removal
REMOVAL
Refer to Warnings and Cautions
1. Raise and support the vehicle.
NOTE: If removing parking brake shoes on both sides of vehicle, perform remaining steps on each side of the vehicle.
2. Access and remove the rear brake rotor (3).
3. Turn the brake shoe adjuster wheel until the adjuster is at shortest length.
4. Remove the upper return spring (1) from the anchor pin (3) and the rear brake shoe.
5. Remove the upper return spring (2) from the anchor pin (3) and the front brake shoe.