Sebring Sedan L4-2.4L (2007)
4. Repeat removal procedure for each camshaft tappet (1).
5. If reusing, mark each tappet for reassembly in original position.
Valve Tappet(s) - Installation
INSTALLATION
NOTE: If reinstalling original tappets they must go back in their original location or engine damage could result.
1. Apply a light coat of clean engine oil to camshafts tappets (1) prior to assembly.
2. Install camshaft tappets (1) into cylinder head.
3. Repeat installation procedure for each camshaft tappet.
4. Install camshafts.
NOTE: If installing new tappets, the valve lash procedure must be performed.