Sebring Sedan L4-2.4L (2007)
3. Place the valve keepers in the retainer. Using metric valve keeper tool such as Snap-on(R) GA317 (or equivalent) installer (2) and remover (1) as a
handle, install valve keepers with a downward push.
4. Remove air hose and install spark plugs.
5. Install valve tappets.
6. Install camshafts.
7. Install cylinder head cover.
Cylinder Head Off
CYLINDER HEAD OFF
CAUTION: Care must be taken not to damage the tappet bore or engine damage may result.
1. Coat valve stems with clean engine oil and insert in cylinder head.
2. Install new valve stem seals (3) on all valves using an appropriate sized socket to seat the seal/spring seat. The valve stem seals should be pushed
firmly and squarely over valve guide.
3. Install valve springs (2).
4. Install keepers in retainer and place on valve spring.
