Sebring Sedan L4-2.4L (2007)
Hose/Line HVAC: Service and Repair
A/C Discharge Line
Removal
REMOVAL
WARNING: Review safety precautions and warnings before performing this procedure. Failure to follow the warnings and cautions could
result in possible personal injury or death.
NOTE: It is not necessary to completely remove the front fascia for A/C discharge line service.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Raise and support the vehicle.
4. Remove the splash shield from the right side frame rail.
5. Remove the nut (1) that secures the A/C discharge line (2) to the A/C compressor (3).
6. Disconnect the A/C discharge line from the A/C compressor and remove and discard the O-ring seal and gasket.
7. Install plugs in, or tape over the opened discharge line fitting and the compressor port.
8. Lower the vehicle.