Sebring Sedan L4-2.4L (2007)
13. If equipped with the 2.0L diesel engine, install the electric positive temperature coefficient (PTC) heater unit into the air distribution housing (2).
14. Install the heater core into the air distribution housing.
15. Install the air distribution housing onto the HVAC housing (1).
16. Install the HVAC housing assembly.
Air Inlet Housing
HOUSING-AIR INLET
NOTE: LHD model shown in illustrations. RHD model similar.
1. Carefully install the recirculation-air door (1) into the air inlet housing (2) by pinching the two ends of the air-door together and aligning the pivot
shafts of the air-door to the pivot shaft holes in the air inlet housing.
NOTE: Install the recirculation door pivot shaft adapter by carefully pushing it straight into the end of the recirculation door pivot shaft.